Click on the image to learn more about the products from Hover over the image and click to learn about the products from
Water-based thermo-reflective dispersion coating for interiors. It protects buildings internally by significantly improving the thermal insulation of a heated space, creating a thermal barrier to avoid heat escaping.
Exceptional Finish
It is a matte coating that can be tinted with a range of 2,500 pigments. Its structure allows for an exceptional aesthetic finish.
Ultra Flexible
It creates a very flexible coating that corrects small cracks or microcracks and prevents new ones from forming on walls and ceilings, further increasing the aesthetic value.
Healthy
Wraps evenly, protecting against mold, bacteria and fungi.
Residences and Buildings
For interior walls and ceilings where heating in the winter months and air conditioning in the summer can cause excessive expenditure.
Bathrooms, Kitchens and Swimming pools
Bathrooms and kitchens / swimming pools and saunas, with hot air circulation and exposed to high water vapor emissions that create favorable conditions for the formation of mold and fungi. B-THERMIQ INSIDE significantly reduces moisture condensation on walls and eliminates thermal bridges, preventing the growth of mould and mildew. It is suitable for allergy sufferers.
Large Surfaces
In large warehouses, it reduces heat loss where high ceilings make heating difficult. It also allows the ideal temperature to be maintained in the hot months, which due to their characteristics tend to have high temperatures inside.
Water-based, easily dispersible thermo-reflective coating for roofs designed to apply protection to almost all roofing materials.
Exceptional Finish
It is a matt coating that can be colored. Its structure allows for an excellent aesthetic finish. It creates a very flexible coating that corrects small cracks or microcracks and prevents new ones from forming.
Temperature Reduction
Significantly reduces the surface temperature of ceilings thanks to light-capturing microspheres. It also improves the building’s thermal balance by reflecting radiation from the insulated surface.
Properties
- It creates a waterproof membrane.
- Limits surface heating of the ceiling.
- Protects the roof.
- Seals microcracks in the roof surface.
- Limits the heating of the lower part of the ceiling.
- Reduces the “Hot Island Effect”.
- Thanks to its elastomer-based formula, the coating is highly flexible and resistant to micro-cracks.
- Eliminates rainwater penetration through the roof.
- Prevents condensation below the ceiling surface.
- It can be used for roof coverings such as roofing felt, ceramic tiles, panels and sheet metal.
It is the only ecological thermal insulation coating with thermo-reflective properties intended for insulating historic buildings and surfaces where it is necessary to maintain the original appearance.
Surface Protection
Currently, the preservation and protection of monuments or objects of great cultural importance has attracted a lot of interest. There is growing interest in developing new materials and technologies to protect them.
Ecological
B-THERMIQ® INVISIBLE is the only environmentally friendly solution available for thermal and thermo-reflective insulation, designed for historic buildings and surfaces where the original appearance must be preserved.
Properties
Transparent, heat-reflective, highly flexible (300%) and vapor-permeable, keeping surfaces free of moisture. Guarantees the maintenance and protection of materials against degradation.
Historical Elements
Protection of the facades of buildings and architectural monuments where other thermal insulation solutions (ETICs, mineral wool) cannot mantain the historical values or are impossible to apply (villas, churches, buildings and historical buildings, among others).
Thermal insulating, reflective, elastomeric and polymeric putty. Ecological coating, prepared and intended for use on surfaces that reach temperatures of up to 320 °C.
Radical Temperature Reduction
B-THERMIQ® MASS provides a drastic reduction in heat emissions on elements that cannot be thermally insulated using traditional methods. It reduces the outside temperature by 100 – 150 °C when applied to a surface with a very high temperature, such as water vapour lines.
Properties
- Limits the loss of heat or cold during fluid transfer.
- Protects the outer coating against corrosion.
- Washable and easy to maintain.
- Resistant to fungus and mold.
- Chemical resistant.
- Thanks to the elastomer formula, the putty is highly flexible and resistant.
Water-based thermo-reflective dispersion coating for walls and exterior facades. It creates a thermal barrier on the façade and provides a better exchange of residual water vapor from the façade. Eliminates water absorption from all exterior walls exposed to rain and weather.
Exceptional Finish
It is a matte coating that can be tinted with a range of 2.500 pigments. Its structure allows for an exceptional aesthetic finish.
Ultra Flexible
It creates a very flexible coating that corrects smallcracks or microcracks and prevents them from reappearing.
Energy Balance
It improves the building’s energy balance and decorates the facades.
Residences and Buildings
Facades of residential buildings, houses, apartments and commercial and public buildings.
Properties
The product’s unique composition helps to improve the building’s thermal balance by reflecting radiation from the insulated surface. In addition to its thermal insulation properties, the coating’s thermo-reflective properties contribute to the facade’s resistance to low temperatures. B-THERMIQ® OUTSIDE repairs cracks and microfissures caused by adverse weather conditions.
Thermal insulating, reflective, elastomeric and polymeric putty. Coating prepared to be used for insulating floors, ceilings and walls in their raw state and before the final coating is laid.
Underfloor Heating
Ideal for underfloor heating, the thermal barrier also insulates the floor from cold or heat coming in from outside.
Can be applied to any floor finish
It can be covered with the desired finish, be it wood flooring, ceramic tiles, self-leveling screed, etc.
Properties
It creates an intermediate barrier with a minimum thickness of 1 mm, easy to apply and durable.
Thermal and protective coating, designed to protect wooden structures against rain, mold or other external factors.
Main Applications
Wooden exteriors, terraces, wooden walls, saunas, boat decks, wooden tiles, etc.
Ecological
Classified as low-VOC (within the zero range), B-THERMIQ® WOOD is effective and environmentally safe.
Properties
- Thermal insulation of wooden objects (external and internal cladding and finishes).
- Eliminates microcracks thanks to its excellent flexibility and extensibility.
- Significantly increases the service life of exterior wooden elements by reducing their freezing and overheating cycles.
- Protects wood from the elements.
- It provides excellent coverage while maintaining the grain texture.